Carbon 48-VB Cardboard Baler

$16,000

SAVES $800+

vs leading competitor

47 inches Feed Opening
1,000 lbs Bale Weight
3-Phase Power Supply

Secure checkout  ·  Ships 8–10 weeks  ·  Up to 5-yr warranty

Prefer to talk to an expert first? Request a quote →

Carbon 48-VB Baler Spec Sheet

Full specs with pricing

Where should we send the PDF?

Sent to your inbox Check your inbox in the next minute.

Prefer to talk first? Request a quote

Volume pricing, freight to your dock, or a spec question — we reply the same business day.

Same day response or $200 off your order

Up to 5-Yr
Warranty
Support
9–9 Mon–Sat

Total machine cost

Carbon 48-VB Cardboard Baler
Assembled, powder-coated, pressure-tested
$16,000
Baling wire starter pack
FREE
Up to 5-year warranty
FREE
Diamond Tier Phone Support
FREE
+$1,400
Your price,
no add-ons.
$16,000
Compare line by line to: PTR, BACE & Cram-A-Lot.
All in Prices · Every Spec · 6 hidden fees we found

Skip the spec sheets. Start Comparing

Where should we send the competitor analysis?

Sent to your inbox Check your inbox in the next minute.

Full Spec Sheet

Feed Opening 47×20 inches
Bale Weight 440–1,000 lbs
Bale Size 47×32×(24-39) in
Cycle Time 55 seconds
Compressing Force 88,000 lbs
Motor Power 10 HP
Chamber Height 59 in
Number of Ties 4
Machine Weight 5,071 lbs
Dimensions 63×47×122 in
Footprint 16.3 sq ft
Noise Level ≤70 dB
Voltage 208/230V or 480V
Power Supply 3-Phase
Warranty 5 yr frame / 3 yr parts / 2 yr labor
Tying Material Steel wire

Perfect for sharing with your team or manager.

Where should we send the PDF?

Sent to your inbox Check your inbox in the next minute.

Safety First Design

  1. The loading gate must be fully closed and locked before the press cycle can engage. Prevents accidental contact with the ram.

DIMENSIONS

How it fits your floor.

Carbon 48-VB Cardboard Baler dimensions — side, front, and top views
Carbon 48-VB Cardboard Baler front view dimensions
Carbon 48-VB Cardboard Baler side view dimensions
Carbon 48-VB Cardboard Baler top view dimensions

Perfect for sharing with your team or manager.

Where should we send the PDF?

Sent to your inbox Check your inbox in the next minute.
Operators like you

How operators like you are using this — and what changed.

Jordan H.
Jordan H. 3PL · FL
Verified

"Doubled order volume in 90 days and cardboard was everywhere. Staff was stacking it in the parking lot. Got our Carbon 43-VB on the dock in 6 weeks. Caught up, and we're already scouting a second location."

Marcus L.
Marcus L. Store manager · Grocery, OH
Verified

"Cut our hauling bill from $1,400 to $380 a month. Two of my staff used to spend an hour a day breaking down boxes. Now it's 15 minutes total. Wish I'd bought it two years ago."

Tomás R.
Tomás R. Plant manager · Manufacturing, IL
Verified

"We bale 6,000 lbs of corrugated a week and we're selling bales to a regional mill for $0.04/lb on top of the hauling savings. The Carbon 72-VB paid for itself in 11 months. No-brainer."

Get a Quote

Same day response or $200 off your order

Why the Carbon 48-VB?

The Carbon 48-VB is the workhorse of the Carbon Compactors lineup. 47" x 32" chamber, 10 HP motor, 40 tons of pressing force. Built for multi-shift warehouses and manufacturing facilities processing 100-200 boxes a day.

  • 88,000 lbs (40 tons) of force — dense 440-1,000 lb mill-size bales
  • 47" x 32" chamber accepts oversized boxes and appliance cardboard
  • 10 HP motor designed for 24/7 operation
  • PLC with auto-density — consistent bale weight
  • 5/3/2-year warranty (frame / parts / labor)

Ideal For

  • High-volume retail
  • Large warehouses
  • Paper & packaging plants
  • Recycling facilities
  • Multi-shift operations

Materials Processed

  • Cardboard / OCC
  • Paper & cartons
  • Plastic film & shrink wrap
  • Textiles & fabrics
  • Aluminum cans
  • PET bottles

Competes With

Bramidan X30 HD $19,500
BACE V63HD $16,800

You save $800+

Covered for the long haul

Premium commercial baler warranty with no deductibles, no-cost replacement parts, and US-based technical support.

Premium commercial baler warranty

  • Structural frame 5 years
  • Parts and components 3 years
  • Labor 2 years

What's included

  • Hydraulic pumps and cylinders
  • Electric motors
  • Control boards and electrical components
  • Hydraulic valves
  • Structural welds and frame
  • Replacement parts and reasonable shipping costs

Important warranty provisions

  • No deductiblesNothing to pay up front on a covered claim.
  • No-cost replacement partsCovered parts are replaced free of charge.
  • Lifetime US-based supportCall a US-based technician for the life of the machine.
  • 48-hour claim responseEvery warranty claim gets a response within 48 hours.
  • Clear, simple exclusionsOnly misuse, consumables, and normal wear are excluded.
  • Free parts shippingReplacement parts ship free during each part's coverage period.
Get a Quote

Same day response or $200 off your order

How it works

Load Material

Load Material

Open the feed gate and load cardboard, paper, or plastic into the chamber. The oversized feed opening accepts full-size boxes without breaking them down.

Press & Compress

Press & Compress

Close the feed gate and press the start button. The ram compresses material to a fraction of its original volume in a single cycle. The PLC monitors bale density automatically.

Tie the Bale

Tie the Bale

When the full-bale indicator light activates, the bale has reached target density. Thread wire through the pre-cut channels and tie off.

Eject & Remove

Eject & Remove

Press both eject buttons simultaneously (dual-hand safety). The automatic chain ejector pushes the finished bale out for forklift pickup.

Get a Quote

Same day response or $200 off your order

Carbon 48-VB: common questions

What size bales does the Carbon 48-VB make?

Cardboard bales of 440–1,000 lbs, about 47 × 32 × 24–39 in, tied off with 4 steel wire ties.

Each compression cycle takes about 55 seconds. You load, close the gate, press start, and keep loading until the chamber is full.

How big a box fits in the Carbon 48-VB?
The feed opening is 47" × 20" and the loading height is 38 in. Flattened boxes up to that width go straight in. Anything wider needs to be cut down first, so size the baler to the largest boxes you get regularly.
Who is the Carbon 48-VB built for?
  • High-volume retail
  • Large warehouses
  • Paper & packaging plants
  • Recycling facilities
  • Multi-shift operations
What else can the Carbon 48-VB bale?
  • Cardboard / OCC
  • Paper & cartons
  • Plastic film & shrink wrap
  • Textiles & fabrics
  • Aluminum cans
  • PET bottles

Plastic film bales come out lighter than cardboard, around 441 lbs. Bale each material separately to get the best price from your recycler.

Is it safe?

Yes. Every Carbon Compactors baler ships from a CE-certified factory and meets ANSI Z245.5 and OSHA 1910.218 requirements. Safety package is standard — no upgrades, no add-ons:

  • Interlocked loading gate — ram cuts out the instant the gate opens mid-cycle.
  • Mushroom-head emergency stop on the control panel halts all hydraulic motion in one press.
  • Anti-rebound gate — mechanical catch holds compressed material if hydraulic pressure drops.
  • Omron G9SE-201 safety relay — fail-safe shutoff that runs independently of the main PLC. If the controller faults, the safety circuit still trips the machine.
  • Omron CP2E PLC manages every cycle for predictable, repeatable operation.
  • Two-hand bale ejection — both hands must be on the controls during eject.
  • Hydraulic overload protection — pressure relief valve prevents over-force damage to the machine and operator.
Will it fit my space?

Here are the exact dimensions for the Carbon 48-VB:

  • Height: 10 ft 2 in (needs a 11 ft ceiling minimum)
  • Width: 5 ft 3 in
  • Depth: 3 ft 11 in
  • Floor space: 21 sq ft

It weighs 5,071 lbs, so plan for a forklift or pallet jack to set it in place.

You'll need a level concrete floor (3,000 PSI or stronger) and clear access from your back door to the install spot. Not sure? Send us a photo of your space and we'll confirm fit.

What power does the Carbon 48-VB need?
The Carbon 48-VB runs on 208/230V or 480V 3-phase 60Hz with a 10 HP motor. Most warehouses and stores already have 3-phase power. If you don't, an electrician can usually wire it in 1 to 2 hours, and most pay $500 to $2,000.
How long to train my staff?
About 30 minutes. Anyone on your team can run it after a short walkthrough — no special license required. Every baler ships with an operator manual and a safety briefing checklist; we recommend a 15-minute review with each new operator before first use.
What's included when it ships?
  • Your baler
  • Liftgate service (no forklift needed)
  • Starter roll of baling wire
  • The operating manual
  • The safety manual
  • 5/3/2 warranty (frame / parts / labor)

The only thing you buy yourself is AW-46 hydraulic oil. About $50 to $80 at Home Depot, Tractor Supply, or any auto parts store. The amount depends on your baler size (5 to 15 gallons).

How fast can you ship?
Most balers go from order to your dock in 8 to 10 weeks. We build in batches and keep some in stock. If you need it faster, call us and we'll see if we have one ready early in the color you want.
Who installs it? How long does setup take?
You do, and it takes about 2 hours. Roll the baler onto a level concrete floor with a forklift or pallet jack. Anchor it to the slab with four 3/4" anchor bolts — your concrete needs to be 3,000 psi or stronger (most warehouse, retail, and dock-area slabs already are). Fill the hydraulic tank with AW-46 hydraulic oil — Home Depot, Tractor Supply, or any auto parts store carries it. We send a step-by-step guide and walk you through it on a call.
Can I finance it?
Yes. We work with Crest Capital, Balboa Capital, and National Business Capital. Most deals are 36 to 60 months with $0 down for qualified buyers. You get an answer in 48 hours, just let us know.
What does the warranty actually cover?
5 years on the structural frame, 3 years on parts and components, 2 years on labor. That covers the frame and welds, the hydraulics, the motors and the electrical. Parts ship from our US inventory. No deductibles and no paid upgrade. The only things not covered are misuse, changes you make to the machine, consumables, and normal wear.

Still have questions? Talk to a real person.

Steve R
Your baler rep Steve R Sales engineer · 8 yrs in balers Online · Avg 7-min reply time

"I'll help you finalize the spec, pricing, and delivery. Text me directly. I'll respond same-day."

(854) 246-2191